Heavy-duty rod ends Classic

– Female thread / Series KHeavy-duty rod ends Classic – Female thread / Series K

Special characteristics:

  • Joint ball of rolling bearing steel, tempered, ground, polished and hard-chrome plated running surface, giving effective protection against corrosion. Applies to rod ends BEFN _-20-501, and BEFN _"-90-501;
  • All rod end housings are of forged case-hardened steel, quenched and tempered and protected against corrosion by galvanisation. They are extremely hardwearing. Applies to the BEFN _-20-501 rod ends;
  • Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
  • Rod ends from size 6-30 can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request.

01 / BEFN _-20-501

Heavy-duty rod ends with pressed spherical plain bearing, maintenance required, series K, female thread; Connection dimensions in accordance with DIN ISO 12240-4 and DIN-ISO 8139 for pneumatic cylinders. Available as a complete system solution or separately with threaded bolts, washers, rubber protector caps and hexagonal locking nuts. For shaft diameters from 5 mm to 30 mm. 

02 / BEFN _-80-501

Heavy-duty rod ends in stainless steel, with pressed spherical plain bearing, maintenance required, series K, female thread; Connection dimensions in accordance with DIN ISO 12240-4 and DIN-ISO 8139 for pneumatic cylinders. Available as a complete system solution or separately with stainless steel threaded bolts and stainless steel hexagonal locking nuts. For shaft diameters from 5 mm to 30 mm. 

03 / BEFN _-90-501

Heavy-duty rod ends in stainless steel, with pressed spherical plain bearing, maintenance required, series K, female thread; Connection dimensions in accordance with DIN ISO 12240-4 and DIN-ISO 8139 for pneumatic cylinders. This differs from BEFN_-80-501 in the joint ball, which is made of rolling bearing steel and has a hard-chrome plated running surface. Available as a complete system solution or separately with stainless steel threaded bolts and stainless steel hexagonal locking nuts. For shaft diameters from 5 mm to 30 mm.

Contact

Do you need more information or do you have any questions?

DURBAL Metallwarenfabrik GmbH
Main office

T° +49 (0) 7941 9460-0
F° +49 (0) 7941 9460-90
info(at)durbal.de

PDF Product datasheets

DURBAL-hochleistungs-gelenkkopf-BEFN-20-501.pdf (1 MB)
DURBAL-hochleistungs-gelenkkopf-BEFN-80-501.pdf (1 MB)
DURBAL-hochleistungs-gelenkkopf-BEFN-90-501.pdf (1 MB)